& TILE  and  SIGN
Below you will find several answers easily supplied for you. If you don't find the answer you are looking for, please email us or us the Contact Form on the Contact Page.
FAQ's
How much does it cost to ship a decal?
This depends on the size of the decal and the location it is being shipped to. Also, if it is going far, you may want to insure it. UPS doesn't ship to po boxes so we normally us USPS. We will make sure you have a price before we start your order so that you can budget this in.
Of course, local pick up is always available. We also deliver to the Spartanburg area free of charge.

How much for a custom decal?
Custom decals are priced by dimension size, color, and design details.

Are the decals legal on my vehicle?
Different states have vastly different laws and regulations regarding decal placement. Most decals are legal as long as they do not block the driver's view of the road. Check with your local laws before making a purchase.

For those living in South Carolina: South Carolina obscenity law doesn't allow Calvin shooting the bird or peeing is illegal to post. For this purpose, we do sell Calvin peeing but we will not post it on our website.

How do I get rid of the bubbles when I place my decal on?
The bubbles happen to everyone. There are several options available to get rid of the bubbles:
1) Try slowly, carefully pushing the bubbles towards the edge of the graphic. This works really well with bigger bubbles.
2) You can take a pin or tip of a razor and make a small hole in the bubble. Then slowly, carefully push the bubble inwards toward the hole. Many professionals use this method but you have to be extremely careful not to put a large hole in your graphic.
3) Sometimes, temperature has a great affect on bubbles. After the decal is placed, allow the natural sunlight to warm up the graphic. This may take a few weeks but the vinyl will slowly draw up and smaller bubbles will disappear on their own. DO NOT use a hair dryer or artificial heat as this may damage the decal.
Magnetic Vehicle Signs
Installation
Vehicle surface should be clean, dry and waxed prior to application. Make contact on one edge of the sign to the vehicle surface in the desired location, then gently allow magnetic to follow contour of vehicle until entire sign is held magnetically to vehicle. If positioning is not correct, remove entire magnet and repeat above process. Do not pull magnetic across vehicle surface as it may stretch the material and damage the vehicle.
Avoid placing magnetic over chrome trim or surface protrusions of any kind.
Magnetic should be 60 degrees Fahrenheit when installing.
Removal
Always remove the sign by lifting from the center of two opposite sides. Never start at the corners. This avoids bent corners and reduced adhesion.
Maintenance
Your magnetic should be periodically removed-once a week minimum. Wash and wipe dry the vehicle and back of magnetic. Trapped moisture, dirt or chemicals may harm your vehicle finish. Clean the magnet face with plain warm water or a mild detergent.
Storage
It is recommended that magnetic signage be stored flat in order to prevent cracking and breaking. If stored rolled, a minimum 3" diameter core is recommended with the lettering on the outside of the roll.
Caution
Magnetic signs will not adhere to areas of a vehicle where plastic body fillers have been used. Use caution in applying magnetic to areas of vehicle that have been damaged or repaired.
Payment
We accept PayPal, Visa, Mastercard, Check, Cash. We don't accept Money Orders due to scams recently sent through the mail. Payment must be made before item will be shipped or picked up. Please contact us first if you have any concerns or questions.
Allen and Brenda Shearer
501 Birch Circle
Spartanburg SC 29303
864-384-8554